What is the DuPont shift schedule?

By Al Davies ยท Updated November 9, 2026

Short answer: The DuPont shift schedule is a 4 week, 28 day cycle of 12 hour day and night shifts, run by four crews so that one crew works days, one works nights and two are off every day. Each crew works 14 shifts, 168 hours in all, and gets 14 days off, including one full week. This guide shows the grid for one crew and how to count it.

What does the 4-week DuPont grid look like?

WeekDay 1Day 2Day 3Day 4Day 5Day 6Day 7Hours
Week 1NightNightNightNightOffOffOff48
Week 2DayDayDayOffNightNightNight72
Week 3OffOffOffDayDayDayDay48
Week 4OffOffOffOffOffOffOff0

This is the grid for Crew A. Each Day or Night cell is one 12-hour shift. Week 1 is four nights then three days off. Week 2 is three days, one day off, then three nights. Week 3 is three days off then four days. Week 4 is a full week off.

After Week 4, Crew A starts again at Week 1. The cycle repeats every 28 days. Some employers run small changes to this order, so count your own version before you post it.

Four-week DuPont grid for Crew A: week 1 four nights, week 2 three days and three nights, week 3 four days, week 4 a full week off. Weekly hours 48, 72, 48 and 0.
One crew, 28 days: 14 shifts and 14 days off.

How do you check the count?

Shifts: week 1 has 4, week 2 has 3 + 3 = 6, week 3 has 4, week 4 has 0.
Total shifts: 4 + 6 + 4 + 0 = 14
Total hours: 14 x 12 = 168
Days off: 3 + 1 + 3 + 7 = 14
Days in the cycle: 14 + 14 = 28
Average week: 168 / 4 = 42 hours

Run the same count on any version of the grid before you post it. If the shifts and days off do not add to 28 days, a cell is wrong.

Tip: Print the grid with a Hours column. The 72 hour week is easy to miss until the pay stub arrives.

How do four crews cover every day?

Crews B, C and D use the same 28 days, but each starts one week later in the pattern. Crew B starts where Crew A is in Week 2. Crew C starts at Week 3. Crew D starts at Week 4.

Count any day of the 28 and the pattern holds: exactly one crew works a day shift, exactly one crew works a night shift, and two crews are off. That gives you 24 hour coverage with no gaps and no overlaps.

CrewStarts atWhere it is on day 1
Crew AWeek 1First night of four
Crew BWeek 2First day of three
Crew CWeek 3First day off of three
Crew DWeek 4First day of the full week off

DuPont schedule overtime and the four crew calendar

A DuPont schedule does not average out for pay: the Department of Labor says averaging hours over two or more weeks is not permitted, so the 42 hour average is not the number that counts. Each workweek stands alone, which makes Crew A's 72 hour week owe the most overtime.

Overtime by week for one crew (example: 12 hour shifts, sample pay week lined up with the grid)

WeekHoursHours over 40
Week 1488
Week 27232
Week 3488
Week 400
Cycle16848

The Department of Labor describes a workweek as a fixed, regularly recurring 168 hours, seven consecutive 24 hour periods, that may begin on any day and at any hour. If your pay week does not start where the grid's week starts, the 72 hours splits differently, so count the hours against your own workweek before you post.

Four crews on one calendar (example grid; N = night, D = day, - = off, Monday first)

Calendar weekCrew ACrew BCrew CCrew D
Week 1NNNN---DDD-NNN---DDDD-------
Week 2DDD-NNN---DDDD-------NNNN---
Week 3---DDDD-------NNNN---DDD-NNN
Week 4-------NNNN---DDD-NNN---DDDD

Each crew follows the same grid, started one week later than the crew before it. Read any column down: for every day there is one D, one N and two dashes.

General information only. A state can add daily overtime rules; ask your state labor department.

What do workers like and dislike about DuPont?

The good part is the week off every four weeks. Workers can plan trips, school and second jobs around it. The grid is also the same every cycle, so people can plan a year ahead.

The hard part is the swing between nights and days. Week 2 has three days then three nights with only one day off between. The 72 hour week is long too. If your pay week lines up with this grid, 32 of those hours are past the federal 40 hour line and earn time and a half. The overtime guide shows the pay math, and some states add daily rules.

Is this schedule safe for tired workers?

NIOSH, part of the CDC, has training material on shift work and long hours. It says no single best schedule design can be recommended. For rotating schedules it advises few back-to-back night shifts, and it cites a gap of 11 hours or more from one shift to the next.

DuPont has four nights in a row in Week 1 and three in Week 2. Ask your workers how they feel on those weeks, and put the answer in your next version.

How do you handle a swap or a missed shift?

Every DuPont swap changes two people's week. Before you approve one, write both workers' hours for that workweek and add the new shift. A worker in the 48 hour week who picks up a day moves to 60, which puts 20 hours past the overtime line.

Keep swaps inside the same crew when you can. Crew members already share the same cycle, so a swap does not move anyone into a week off. If you must pull someone from a crew that is in its week off, ask first and note it on the posted schedule.

For new hires, show the full 28-day grid on the first day, not only the first week. The first week looks light or heavy depending on where the crew starts, and the full grid shows what the month looks like.

What goes on the printed DuPont page?

Print four things: the grid for each crew, the start date for Week 1, the shift hours, and the name of the person who approves swaps. One page that holds all four ends most questions before they start.

Use the same words on every row. This guide uses Day, Night and Off. If your shop says A shift and B shift, put those words in the legend. Mixed words cause missed shifts.

Where do you keep the grid?

Write each crew's start week next to its name, and post the date each crew starts Week 1. The guide to posting a schedule without an app covers where to post it. If you want shifts and weekly totals in one view, look at ShiftGarden.

FAQ

How many hours a week is the DuPont schedule?

It averages 42 hours a week. The real weeks are 48, 72, 48 and 0.

How many crews does the DuPont schedule need?

Four. Two crews work at a time, one on days and one on nights, while two crews are off.

How many days off does a DuPont worker get?

14 days off in every 28, including one full week off.

Is the DuPont schedule the same as the Pitman schedule?

No. DuPont repeats every 28 days with a full week off. Pitman repeats every 14 days and has no full week off.

Does the DuPont schedule trigger overtime?

Yes, in most weeks. Federal overtime starts past 40 hours in one workweek for most hourly staff, and three of the four DuPont weeks cross it. Check your state for daily rules.

Does a DuPont schedule average to 42 hours for overtime?

No for pay. The Department of Labor does not allow averaging hours over two or more weeks, so each workweek is counted alone, and a 72 hour week has 32 hours over 40.

Sources

Try ShiftGarden to put your week on one page.